Pretty straight forward Trev and a definite case for nylon line and compression fittings as it will do away with any excess length - I could only see the prefab ones in a minimum of 2 feet. I'll grab a photo of mine tomorrow and post up to give you an idea.
IMG_20210417_223408.jpg IMG_20210417_223236.jpg
The silver fittings are the original Seastar ones with the pilot steering lines connected. These use an olive to seal and an internal spigot to stop the line crushing. The tees are a 3 way female 1/4 NPT, the fittings between the helm and the tees are 1/4 NPT male-male, the fittings that the original Seastar hoses attach to are 1/4NPT male to 3/8 compression straight. The balance line has a 1/4NPT male-female spacer to allow the 1/4NPT to 3/8 compression elbow to be rotated or it contacts the helm before it comes tight. You will also need three fittings to screw into the pump if they aren't included - 3/8 compression to whatever thread is required to screw in (the two common types are 1/4NPT or 1/4BSP). Do not use thread tape. Grab a tube of high pressure pipe sealant.
My pump is mounted in the side pocket area on the cabin bulkhead. The best spot for yours would be on the bottom of the helm locker - gives the best pump orientation for bleeding. Next best would be towards the bottom on the inboard side wall. When mounting on a vertical wall, the electrical motor should be mounted up. This does create a potential for air locks (these can be dealt with) but it prevents any oil that may get past the seal on the pump shaft destroying the electric motor. Some manufacturers do recommend mounting the pump the other way - minimizes calls about air locks and IMO they don't care about longevity - just has to get past the warranty period.
Agree Dignity
Pretty average the install done a decade ago
Probably only worked well cuz it is enclosed and inside cabinIMG_20210417_145920.jpg
Sent from my VOG-L09 using Ausfish mobile app
Cheers
Trev
I like yours Scott very tidy
Thanks for pics and additional info
Probably have room on the bottom if I can tidy up the wiring
Sent from my VOG-L09 using Ausfish mobile app
Cheers
Trev
I bought Raymarine Evo-150 from Moose last week $2870 about 5 weeks
Now about to tidy up wiring in preparation - needs it hey Dignity
Will post pics as it goes
Took family camping Moreton Island 4 days last weekend using boat - no fishing but a nice weekend - snorkelling wrecks etcAttachment 123819signal-2021-04-27-143016.jpegIMG_20210424_143307.jpg
Sent from my VOG-L09 using Ausfish mobile app
Cheers
Trev
This arrived today
Noyce IMG_20210524_202549.jpg
Sent from my VOG-L09 using Ausfish mobile app
Cheers
Trev
glad it all arrived safely
let me know if i can help dude. thats a lot of fun toys you got there
Thanks Guys and especially Moose - nice kit - quick delivery
Mentioned last night to a mate with similar boat and he suggested put on headlamp and immediately commence the install
Sent from my VOG-L09 using Ausfish mobile app
Cheers
Trev