Page 1 of 2 12 LastLast
Results 1 to 15 of 26

Thread: Raymarine Electronics

  1. #1

    Raymarine Electronics

    Anyone recommend cheapest place for Raymarine electronics
    I've seen
    Whitworths $3k
    CHSmith $2959
    My thinking on the first two are Whitworths I can drive to where CHSmith are Victoria so for $40 difference I would go local
    Arnolds boat shop $2925 copping a lot of negative reviews - they offer 5% discount if you provide email address then once given they say excludes electronics and navigation (sneaky!)

    After Evo150 autopilot

    And yeah I install it
    Cheers

    Trev

  2. #2
    Ausfish Platinum Member
    Join Date
    Mar 2015
    Location
    Kalbarri, WA

    Re: Raymarine Electronics

    Try a PM to Chocolatemoose on here--he deals in Raymarine, I've bought a complete system from him, very happy.

  3. #3

    Re: Raymarine Electronics

    I saw him talking about Garmin
    Didn't know Raymarine
    Quote Originally Posted by ranmar850 View Post
    Try a PM to Chocolatemoose on here--he deals in Raymarine, I've bought a complete system from him, very happy.
    Sent from my VOG-L09 using Ausfish mobile app
    Cheers

    Trev

  4. #4
    Ausfish Silver Member DATCOL's Avatar
    Join Date
    Feb 2005
    Location
    CABOOLTURE

    Re: Raymarine Electronics

    Hi Trev Can contact Moose ( Anthony ) on 0411816660
    cheers COL

  5. #5

    Re: Raymarine Electronics

    Thanks guys chatting with Moose atm - price seems good
    Going with Raymarine evo150
    Only disappointment is I thought the kit came with everything to install as shown in this video but apparently no hydraulics lines or connectors so a few hundred dollars more and a trip to Pirtek



    Also about 6 weeks wait atm
    Anyway that's news for now
    Screenshot_20210415_103750_com.google.android.youtube.jpg

    Sent from my VOG-L09 using Ausfish mobile app
    Cheers

    Trev

  6. #6
    Ausfish Platinum Member
    Join Date
    Mar 2015
    Location
    Kalbarri, WA

    Re: Raymarine Electronics

    yeah, I had mine fitted by the boatshop when they were rigging the new motor--saw the bill, hit the roof, they had subbed it out to a hydraulics specialist, $1000 later....A mate bought one after being on my boat for a while, fitted it himself, just had to get line and some fittings as you say. The pilot itself is great, can't speak highly enough of it.

  7. #7

    Re: Raymarine Electronics

    Yeah Moose said typically $1k for bods to install or a few hundred for hydraulic parts and some knowledge of hydraulics and go for it
    I've done plenty of automotive hydraulics and marine I did the Bennett's trim tab install which is hydraulics
    So I'm not paying for someone to do something I know I can do
    Do reckon according to the video they once upon a time supplied hydraulic line and fittings in the kit
    Quote Originally Posted by ranmar850 View Post
    yeah, I had mine fitted by the boatshop when they were rigging the new motor--saw the bill, hit the roof, they had subbed it out to a hydraulics specialist, $1000 later....A mate bought one after being on my boat for a while, fitted it himself, just had to get line and some fittings as you say. The pilot itself is great, can't speak highly enough of it.
    Sent from my VOG-L09 using Ausfish mobile app
    Cheers

    Trev

  8. #8

    Re: Raymarine Electronics

    Could do it a lot cheaper Trev. If you want to use prefab lines it will be expensive but there is really no need. Old fashioned nylon line and compression fittings with olives have been in service for years. That's what I used on mine.

  9. #9

    Re: Raymarine Electronics

    Scott I think the Bennett's trim tabs were what you describe and so was the install video earlier in this thread.
    Moose was talking about flexible hose with woven outer from Pirtek - might be more than necessary
    Where would I get the alternative from - same place?
    Quote Originally Posted by scottar View Post
    Could do it a lot cheaper Trev. If you want to use prefab lines it will be expensive but there is really no need. Old fashioned nylon line and compression fittings with olives have been in service for years. That's what I used on mine.
    Sent from my VOG-L09 using Ausfish mobile app
    Cheers

    Trev

  10. #10

    Re: Raymarine Electronics

    Any good hydraulics shop should carry it. If you can't find it locally, the Hydrive stuff is good solid hose. Just make sure it meets the pressure required by your steering manufacturer - also ask for spigots as well as the fittings. I normally get my fittings from Gateway hydraulics - bit of a hike for you but they carry a good range in stock. I assume you have Seastar steering? The firring they use is basically a 3/8 compression with the olive and nut being replaced by the prefab hose end and Oring. By adding a few inches of nylon hose behind the helm and then a tee assembly ( there are a couple of ways of doing this to get the best lay of the hoses), the original hose can be screwed into the tee along with the two steering lines for the pilot pump. There is also a balance line that goes from the lower balance port on the helm to the pump.

  11. #11

    Re: Raymarine Electronics

    Post up a pic of behind your helm area Trev.

  12. #12

    Re: Raymarine Electronics

    Trev - You will need to identify what type your helm unit fittings are where you tee the pump in. Assuming you may have a Seastar system then the t pieces you need may be the newer ORFS type. Not sure about Raymarine but with the Simrad kits you would get everything you need for self install, hoses/fittings and the clear hose between the pump and helm unit. No way that stuff should cost that much and installing these things is a piece of cake but the bleeding process can take a while to get all the air out which is critical.

  13. #13

    Re: Raymarine Electronics

    I'll do that over the weekend
    You'll see my electrical and go wow LOL
    Quote Originally Posted by scottar View Post
    Post up a pic of behind your helm area Trev.
    Sent from my VOG-L09 using Ausfish mobile app
    Cheers

    Trev

  14. #14

    Re: Raymarine Electronics

    Back of Sea Star hydraulic steering
    Be good to have Junction at these two elbows
    The pump can fit into this box by the looksIMG_20210417_145209.jpgIMG_20210417_145314.jpgIMG_20210417_145703.jpg

    Sent from my VOG-L09 using Ausfish mobile app
    Cheers

    Trev

  15. #15

    Re: Raymarine Electronics

    Probably be good if it can be contained in hereIMG_20210417_145920.jpg

    Sent from my VOG-L09 using Ausfish mobile app
    Cheers

    Trev

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us