View Full Version : 420 renegade motorguide shaft length
stevej
20-10-2018, 03:58 PM
Im going to order a motorguide x15 with pin point
there are 3 shaft length options 48 55 60 inch
what have people fitted please
gazza2006au
20-10-2018, 05:26 PM
Maybe head down to your local river Steve drop her in and use a tape measure to measure what shaft length u will need might be best option
stevej
20-10-2018, 05:37 PM
thanks but im too lazy its a pretty common boat so thought someone may know
gazza2006au
20-10-2018, 07:07 PM
Not many people kicking around boards like this anymore mate tons of people have moved to facebook groups, i use them all because i am a picture whore ;D loving seeing other peoples projects and advice
Dezzer
20-10-2018, 07:39 PM
Not many people kicking around boards like this anymore mate tons of people have moved to facebook groups, i use them all because i am a picture whore ;D loving seeing other peoples projects and adviceI have the 60 on a 440. You can always lift them up so not an issue if it's longer than needed. With two blokes down the back in shirty conditions it occasionally breaks out so I wouldn't want it any shorter
Sent from my [device_name] using Ausfish mobile app
Dezzer
20-10-2018, 07:40 PM
Tapatalk!!
Didn't mean to reply to Gazza
Sent from my [device_name] using Ausfish mobile app
stevej
20-10-2018, 07:57 PM
still plenty here
so ill give it a go here
i dont know many of the facebook pages apart from a few cod ones
Sydney angler going lost a bunch of good blokes
Noelm
21-10-2018, 06:08 AM
Sydney Angler was pretty good, but like most of them, it just slowly fizzled out with only a handful of regulars posting, they had a kind of sell your stuff day once which was good, you just turned up and kind of like a garage sale, you just sold your unwanted boating and fishing gear, I met a lot of members there.
gunna
21-10-2018, 06:56 AM
Sydney Angler was pretty good, but like most of them, it just slowly fizzled out with only a handful of regulars posting, they had a kind of sell your stuff day once which was good, you just turned up and kind of like a garage sale, you just sold your unwanted boating and fishing gear, I met a lot of members there.
Yes it was a good site. I moderated on there in the very early days.
stevej
23-10-2018, 06:42 PM
i ended up getting a motorguide 55pd x15 pinpoint with 54 inch shaft could have got away with the 48 inch shaft but no major issue
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.