In hull Transducer for a fishfinder

[Kiwiboy-2008]

HI I have a 3 seater jetski and am having trouble finding a fishfinder with an in hull transducer to fit inside the hull. I live on the gold coast can anyone help and tell me where I can find an in hull transducer and what a good fishfinder would be for my jetski.

[old_fisho]

HI trying to get a inhull transducer to work on a jetski is almost impossible i have put a attch for you Damian can help with everything hope this helps . Dont know what happened when u called sat nite lost service.

Perry


http://mmstainless.com.au/catalog/JESKI_Products-2-1.html



http://www.ozpwc.com/index.php?option=com_wrapper&Itemid=44

[Mossie1]

It is my belief you can use any of the Humminbird transducers as "through Hull" it's only a matter of arolditinng the transducer to the inside of the hull just make sure you mix the glue well and that there are no air bubbles.

Mossie1

[FishHunter]

AFAIK any transducer can shoot through the hull. I have a Eagle shooting through my fiberglass hull and it works perfectly. I wouldnt use araldite either silicone or All Clear work and All Clear has the advantage that it can just be peeled off if you want to remove the transducer.

[scrotty]

Definitely don't use araldite! The product supplied in Transducer fitting kits sold at Hobie is called "Goop" It works well but sets like a rock. I just had to do a removal and upgrade. It came off and cleaned up well after a lot of work cutting the old "Goop" of the old transducer. I have reset the new upgrade one in clear silicon. Works a treat.