+ Reply to Thread
Results 1 to 14 of 14
Thread: press stud piss me off
-
23-07-2012 11:27 PM #1
press stud piss me off
any of you know of a good press studs to have on the canvas/boat, I am sick of repairing studs that keep braking off, even after spraying them with salt away and other stuff to keep them in good condition.
24-07-2012 07:00 AM
#2
Re: press stud piss me off
The press studs IMO are rubbish they pretty much all end up corroding. I would be replacing them with something a bit more like this:
Common Sense Single Height 2 hole stud
Or this:
![]()
![]()
![]()
![]()
Stayput Fastener - Single Vertical
24-07-2012 02:00 PM
#3
Re: press stud piss me off
Or where possible use sail track
Garry
http://www.gdmarineservices.com.au Call for a great price on a New Honda outboard, Engines In Stock Now !!!
24-07-2012 03:19 PM
#4
Re: press stud piss me off
yes, sail track is a wonderful thing..
someone told me the other day that there are more important thing's in life than fishing, to which i replied..... what?
24-07-2012 06:30 PM
#5
Re: press stud piss me off
Press studs will eventually all fail and it is hard to find SS ones which do last a bit longer, I have found that when I put them in I spray them with silicone spray first and then every couple of trips do it again and it seems to do the job. I did this after I had corrosion in some zips and the only thing that worked was silicone spray every day over a couple of days and then hitting it with hot water. Nothing else previously worked.
I do have sail track on my bimini as I need to slide it back to reduce height when it is folded down otherwise I can't get it into the carport and I used the C Track:
https://www.whitworths.com.au/main_i...AbsolutePage=1
but what sort would you use for side curtains instead of press studs or the other alternatives mentioned above.
24-07-2012 09:45 PM
#6
Re: press stud piss me off
I have been using a generous amount of vaseline in the press stud around the spring and it seems to work well. On;y takes a few minutes to put on every few months.
Cheers
Stu
24-07-2012 10:47 PM
#7
Re: press stud piss me off
lanolin helps here
25-07-2012 10:44 PM
#8
Re: press stud piss me off
what is sail track ?
25-07-2012 10:48 PM
#9
Re: press stud piss me off
i rplaced some with 2 hole stud , but i also have to make the ring in th fabric, and do not look attractive.
i am surprised with all the demand for press studds. the manufacturers did not come up with better quality SS stud
25-07-2012 10:50 PM
#10
Re: press stud piss me off
wouldn.t thevaseline leaves stain mark on the white fabrik?
25-07-2012 11:00 PM
#11
Re: press stud piss me off
lanox didn't on mine
26-07-2012 11:09 AM
#12
Re: press stud piss me off
Vaso works fine if you look at the part you're trying to lubricate you will realise that half a matchhead of vaso is more than enough to do one button, just a tiny smear.
26-07-2012 09:41 PM
#13
27-07-2012 06:30 PM
#14
Re: press stud piss me off
Snapersam if you follow this link it is what understand to be sail track and it has particular fitings that slip into the C track but I imagine there are a number of types and I am not sure how it is used for items such as side curtains, can any one oblige with a photo as I would love to replace my press studs.
www.whitworths.com.au/main_i...AbsolutePage=1






Reply With Quote






