Results 1 to 5 of 5

Thread: Locating Batteries in 4.1m Polycraft

  1. #1
    Ausfish Addict Splash's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne

    Locating Batteries in 4.1m Polycraft

    Inside Front wells or midship?

    I have three to install (2xMK + 1xcrank).


    Pros and Cons for each location?


    Splash

  2. #2

    Re: Locating Batteries in 4.1m Polycraft

    Hey Splash! Why 3 batteries? wouldn't 2 suffice?
    LITTLE SKIPPER!

  3. #3
    Ausfish Addict Splash's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne
    Thread Starter

    Re: Locating Batteries in 4.1m Polycraft

    2 x 12V for 80lb Leccy
    1 x 12V for Crank battery

    Splash

  4. #4

    Re: Locating Batteries in 4.1m Polycraft

    Get as much weight up the front as possible or you will be pointing nose up most of the time. If you have a Centre Console stick the cranking battery inside that. The 2 Deep Cycles can sit just in front of the 2 big front bins.

    Ta
    Matt

  5. #5
    Ausfish Addict Splash's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne
    Thread Starter

    Re: Locating Batteries in 4.1m Polycraft

    Thanks Matt.

    I will be using a tiller.

    How would you best connect the 2 x deep cycle batteries together through the 2 big front bins?

    Splash

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us