Who measures their anchor rope?
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 18
  1. #1
    Platinum Member the gecko's Avatar
    Join Date
    Jun 2005
    Location
    Hervey Bay
    Post Thanks / Like

    Who measures their anchor rope?

    Im just starting to learn about "scope" ie- anchor rope length to depth ratio, so that the boat doesnt drift in current.

    Has anybody got any good ideas for measuring out rope length?

    I was thinking that Id have to sew a color coded bit of material into the rope at measured lengths, if I really wanted to know how much rope was out.

    cheers
    Andrew
    Fishing- It's only an addiction if you're trying to quit.

  • #2
    Ausfish Addict Scott nthQld's Avatar
    Join Date
    Jun 2007
    Location
    Townsville, Qld
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Nah I Don't measure the rope, but usually find the mark, stop and find the direction of drift and motor back up the drift line and go about 4 times the depth past the mark and drop anchor, tieing off when I'm over the top of the mark, if there's a bit of current, I'll then pull the boat forward a couple of metres. Serves me pretty well, no problems hooking up and have never pulled anchor this way.

  • #3
    Ausfish Bronze Member ahamay's Avatar
    Join Date
    Nov 2009
    Post Thanks / Like

    Re: Who measures their anchor rope?

    I don't have the answer but recently sorted out the correct length of anchor chain for my rig and that's made a massive difference.

  • #4
    Ausfish Platinum Member STUIE63's Avatar
    Join Date
    Feb 2007
    Location
    TOWNSVILLE
    Post Thanks / Like

    Re: Who measures their anchor rope?

    just use different colour paint or nikko's every so long . by using different colours you would not have to count from the start
    Stuie
    IF IT CAN'T EAT A WHOLE PILLY I DON'T WANT IT

  • #5
    Ausfish Platinum Member peterbo3's Avatar
    Join Date
    Jan 2003
    Location
    Brisbane
    Post Thanks / Like

    Re: Who measures their anchor rope?

    You can also thread some coloured whipping twine through one the strands every 50M if you fish deep water. Stuie, you must have a better Nikko than me ............mine faded away to nothing.
    ROLL TIDE, ROLL.................

    Regards,
    Peter


    http://www.superiorterminals.com.au

  • #6
    Ausfish Addict Noelm's Avatar
    Join Date
    Mar 2006
    Location
    Shellharbour
    Post Thanks / Like

    Re: Who measures their anchor rope?

    after a bit of time, just the angle of the rope is enough to tell you if you have enough out, if it is rough, then no amount of theory will beat experience.

  • #7
    Ausfish Platinum Member whiteman's Avatar
    Join Date
    Jul 2002
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Even simpler - get a black marker pen. Measure 10m accurately and mark one ring with the pen. Double the line over for 20m and mark 2 rings ..... at 50m mark a big thick black ring then go back to single line for 60m, etc. The pen marks stay there for a long time.

  • #8
    Ausfish Bronze Member Tickleish's Avatar
    Join Date
    Mar 2008
    Location
    Redlands
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Marker pens and the like will not work. They might for the first couple of trips.

    I use orange coloured twine - one piece at one hundred metres two pieces at two hundred and so on. You can also see this if your anchoring in a storm when visability is not good. Try lookindg for a black pen mark when its blowing 50 knots & raining.

    This is for anchoring a 40 footer. On smaller boats i guess you could have the twine at smaller incruments.

  • #9
    Ausfish Addict
    Join Date
    May 2007
    Location
    sydney
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Get a different coloured rope and every XX m or ft and just weave 1 it through the rope. 5 over unders on my boat means 25m etc. Only used when we want to know anchor should be on bottom but sometimes with current it doesn't feel like it has touched.

    There is commercial numbered bits of plastic at the usual stores as anchor rode markers. Flouro irridescant and at night with the winch you can tell if you are about to get to the chain.

  • #10
    Ausfish Platinum Member STUIE63's Avatar
    Join Date
    Feb 2007
    Location
    TOWNSVILLE
    Post Thanks / Like

    Re: Who measures their anchor rope?

    you can get nikko's for marking clothes these will stay on
    IF IT CAN'T EAT A WHOLE PILLY I DON'T WANT IT

  • #11
    Ausfish Platinum Member whiteman's Avatar
    Join Date
    Jul 2002
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Quote Originally Posted by Tickleish View Post
    Marker pens and the like will not work. They might for the first couple of trips.

    I use orange coloured twine - one piece at one hundred metres two pieces at two hundred and so on. You can also see this if your anchoring in a storm when visability is not good. Try lookindg for a black pen mark when its blowing 50 knots & raining.

    This is for anchoring a 40 footer. On smaller boats i guess you could have the twine at smaller incruments.
    I use a standard black marker every few years. My boat does around 150 hours a year (except this year has been a little less cause of too much wind). Maybe you use the wrong pens.

  • #12
    Ausfish Bronze Member Jabiru658's Avatar
    Join Date
    Mar 2007
    Location
    Castlemaine
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Quote Originally Posted by Tickleish View Post
    Marker pens and the like will not work. They might for the first couple of trips.
    If you use an indelible ink marker, like they sell for writing names onto clothing and sporting goods then it will last for ages.

    They are meant to survive being washed with washing powder in hot water with stain removers, just don't get them on anything else... you'll never shift the marks
    | Savage Kestral with Evinrude 9.9 --> Stacer 3.9 with Yamaha 15 --> Polycraft 4.55 CC with Honda 50 --> Ally Craft Reel Mate 4.25 with Yamaha 3 cylinder 30 horse |

  • #13
    Ausfish Platinum Member peterbo3's Avatar
    Join Date
    Jan 2003
    Location
    Brisbane
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Quote Originally Posted by STUIE63 View Post
    you can get nikko's for marking clothes these will stay on
    Thanks. Ya learn new stuff every day.
    ROLL TIDE, ROLL.................

    Regards,
    Peter


    http://www.superiorterminals.com.au

  • #14
    Ausfish Bronze Member Pirate_Pete_Tas's Avatar
    Join Date
    Dec 2005
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Quote Originally Posted by Noelm View Post
    after a bit of time, just the angle of the rope is enough to tell you if you have enough out, if it is rough, then no amount of theory will beat experience.
    Noelm has it 3 out for every 1 down & then add more the rougher the wind & current

  • #15
    Ausfish Bronze Member Tickleish's Avatar
    Join Date
    Mar 2008
    Location
    Redlands
    Post Thanks / Like

    Re: Who measures their anchor rope?

    Like i said - if your standing in a wheelhouse in the middle of a storm you are not going to see a black pen mark, whether its water proof or not.

  • Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts