-
Ausfish Bronze Member
OMC Adhesive M Sealant Alternatives?
Hi All,
Just redoing the water pump on my 30 Evinrude, the workshop manual says to use OMC Adhesive M sealant in various places and am looking for alternatives. Google brings up a few alternatives like:
Marpox sealer 1000
Boat Armour Sealer 1000
3M Scotch-Grip Rubber and Gasket Adhesive #847
but cannot get any of them locally, is there anything in the Permatex line of products or similar that you can use?
I have an alternative for the OMC gasket sealing compound but am stuck with the Adhesive M. Any suggestions would be appreciated.
Below is a couple of extracts from the manual:
*************
2. Using OMC Adhesive M sealant, glue a new O-ring to the shoulder at the top of the pump housing.
Use the adhesive sparingly.
4. Lightly coat the impeller plate-to-gearcase deck mat/ng
surfaces with OMC Adhesive M sealant. Position the impeller
plate over the drive shaft and into position on the
gearcase deck.
**************
Kind Regards,
Mike
-
Ausfish Addict
Re: OMC Adhesive M Sealant Alternatives?
I guess you have tried an OMC dealer??
-
Ausfish Bronze Member
Re: OMC Adhesive M Sealant Alternatives?
Hi Mike, P/N 776964 is the genuine BRP stuff and any BRP dealer could supply it. No I do not know of an aftermarket equivilent and we use Adhesive M a fair bit in the workshop.
Cheers,
Huey.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules