Mercury 150 EFI Fuel figures ?
+ Reply to Thread
Results 1 to 11 of 11
  1. #1
    Ausfish Premium Member Dicko's Avatar
    Join Date
    Jun 2002
    Location
    Nth Qld
    Post Thanks / Like

    Mercury 150 EFI Fuel figures ?

    Does anyone have some real world fuel figures for a 150 EFI to share ?

    thanks

  • #2
    Banned
    Join Date
    Jun 2003
    Post Thanks / Like

    Re: Mercury 150 EFI Fuel figures ?

    about 1l/km at about 4000 rpm

  • #3
    Ausfish Premium Member Dicko's Avatar
    Join Date
    Jun 2002
    Location
    Nth Qld
    Post Thanks / Like
    Thread Starter

    Re: Mercury 150 EFI Fuel figures ?

    Thanks pinhead.

    Heard of some good prices on these lately. The $8000 odd left in your pocket instead of buying a 150 4stroke or DFI 2 stroke takes a long time to soak up in fuel saving.

  • #4
    Banned
    Join Date
    Jun 2003
    Post Thanks / Like

    Re: Mercury 150 EFI Fuel figures ?

    I have one on my boat..not had any problems with it..very happy with it.

  • #5
    Ausfish Premium Member Dicko's Avatar
    Join Date
    Jun 2002
    Location
    Nth Qld
    Post Thanks / Like
    Thread Starter

    Re: Mercury 150 EFI Fuel figures ?

    yeah, they're proven as pretty robust.

    It's funny over the last few boats I've gone from regular 2 strokes, to a 4 stroke, then a DFI 2 stroke and now seriously considering turning the full circle when setting up my next boat.

  • #6
    Ausfish Platinum Member honda900's Avatar
    Join Date
    Apr 2006
    Location
    Brisbane - Redlands
    Post Thanks / Like

    Re: Mercury 150 EFI Fuel figures ?

    Dicko,

    as you probly well know, the only problem you run into is range, if your fuel tank size is good it wont be a problem.

    regards
    HOnda.

  • #7
    Ausfish Silver Member
    Join Date
    Jul 2007
    Post Thanks / Like

    Re: Mercury 150 EFI Fuel figures ?

    Try the Mercury performance bulletin page.
    http://www.mercurymarine.com/look_de...p5090150efi=20

  • #8
    Ausfish Silver Member
    Join Date
    Jul 2007
    Post Thanks / Like

    Re: Mercury 150 EFI Fuel figures ?

    The Mercury figures are in US gallons.

    1 US gallon is about 3.8 litres.

    20 US gall/hr = 76 lites/hr.
    15 US gall/hr = 57 litres/hr
    12 US gall/hr = 45.6 litres/hr

    Something to work with.

  • #9
    Ausfish Premium Member Dicko's Avatar
    Join Date
    Jun 2002
    Location
    Nth Qld
    Post Thanks / Like
    Thread Starter

    Re: Mercury 150 EFI Fuel figures ?

    Thanks guys. Have seen those tests, some good info, was just looking for some real world stuff besides their published ones. Lot's of independant info around on the 4 stroke & DFI motors, but no-one is testing the older tech stuff.

    Have done up a spreadsheet with a million and one calcs on it. I have a mth or so before I have to decide. It looks like on a light boat swinging a bigger prop these are worth looking at for the $ savings.

  • #10
    Ausfish Silver Member hakuna's Avatar
    Join Date
    Jan 2006
    Post Thanks / Like

    Re: Mercury 150 EFI Fuel figures ?

    Mine averaged 1km/lt over the 4 yrs I had it.
    Problem I had was the oil sensor every 18months tripped and it sets off the alarm and turns your motor off. Restart each time, runs for 5 mins and turns itself off again. Mercury said it was a common fault in this motor at $150/ pop. Long trip home from 50 fathoms. (both times)
    Change of brand for me

    cheers

    cheers

  • #11
    Ausfish New Member
    Join Date
    Jul 2009
    Location
    Brisbane
    Post Thanks / Like

    Re: Mercury 150 EFI Fuel figures ?

    502 hours - older EFI (XRI) 150 - slightly less than 1l / km @4,000.

    Still strong as an ox.

  • Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts