Page 2 of 2 FirstFirst 12
Results 16 to 23 of 23
  1. #16

    Re: Jack Erskine's washers

    Give em the #[smiley=thumbsup.gif] also.... have em in a few CVZ's and a Eskine Special LP..... Strong & smooth. www.jackerskine.com

    # # Cheers Les


    "Live as if you were to die tomorrow. Learn as if you were to live forever."

  2. #17
    Rocket439
    Guest

    Re: Jack Erskine's washers

    Quote Originally Posted by jimbolikes_barra
    na mate got about half a kilo more outa mine, what model you got B or BSF just wondering if they may be slightly different.

    cheers
    jim #
    Was just wondering if anyone knows the difference between the Curado B and BSF. I had a look at both when i bought my barra combo and the only difference i could see visually was a different spool but the price range was about 40-50 bucks(B being cheaper) I asked the guy at the tackle shop and he wasn't too sure! I ended going with the BSF cos the spool ran smoother! By the way i'm getting about 4-5kgs of drag from my Curado 200 BSF but i'm still sending it to jack!

  3. #18

    Re: Jack Erskine's washers

    the SF stands for "Super Free" basicly this means that the pinion gear is carried by a bearing instead of floging around on the yoke.

  4. #19
    Rocket439
    Guest

    Re: Jack Erskine's washers

    i thought as much but wasnt entirely sure. thanks for the info.

  5. #20
    bearclaw
    Guest

    Re: Jack Erskine's washers

    Highly recomend them, only instaled two kits yesterday on my Japanese version Chronachs, these have better drags than the Aussie ones, I can feel there is a great improvement on these and look forward to see the final tested the drag. Again highly recomend them.

    Myles

  6. #21

    Re: Jack Erskine's washers

    Gday are you men using the cal's reel and drag grease supplyed with the carbontex washers it is recomended to be used dry or very lighty greased just about to put mine in to grease or not to grease that is the question will it afect the drags max performance as i dont want to jeperdise this

  7. #22
    bearclaw
    Guest

    Re: Jack Erskine's washers

    I just put a light coat of Cal's on mine so the drag washers appear wet and sticky to the touch.

    Myles

  8. #23

    Re: Jack Erskine's washers

    I used the grease under recomendation on the extreme smoothies although the instructions say install dry,it made the drag very chatery at full song but not a big job to wash and reinstall dry making them very smooth.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us