Results 1 to 13 of 13

Thread: 90 hp evinrude e-tec

  1. #1

    90 hp evinrude e-tec

    has anyone got one of these and what do they think

  2. #2

    Re: 90 hp evinrude e-tec

    Wait for it ... You've opened up a can of worms for the anti E-Tec clan...
    Sam...

  3. #3

    Re: 90 hp evinrude e-tec

    here we go again

  4. #4
    Weekend_Hooka
    Guest

    Re: 90 hp evinrude e-tec

    Mine pushes a 6mtr Wahoo long boat and has done about 100 hours with no problems other than the initial teething problems I have experienced with other new motors. It is very economical, has a great hole shot, is quiet, although not as quiet as the 4 stroke 60HP Yamaha I had but still very quiet and easy to hold conversation without yelling,no fumes, idles all day without problem, has lost the badge off the top of the motor cover because they dont stick it on well, has lost some paint off the prop because that's not stuck on well either.
    What more can I say

  5. #5
    Geoff_Atkinson
    Guest

    Re: 90 hp evinrude e-tec

    I got one, pushes a 5.m Quintrex Cuddy CaB

    Very Quiet, great on fuel although I dont feep figures, no fumes, great off the mark (is that what you call hole shot?)

    Only problems I have had are with the tilt trim and the engine being mounted too high.

    I'd recommend it to anyone.

    Cheers

    Geoff

  6. #6

    Re: 90 hp evinrude e-tec

    [quote author =sea raider link=1160474736/0#4 date=1160534317]
    I'd recommend it to anyone.

    Cheers

    Geoff[/quote]


    Really!!!! I hadn't noticed glad you pointed that out!!!!


    Ian
    Alcohol doesn't agree with me, but i sure do enjoy the argument!!!

  7. #7
    Geoff_Atkinson
    Guest

    Re: 90 hp evinrude e-tec

    Thanks Ian

  8. #8
    Wear_the_fox_hat
    Guest

    Re: 90 hp evinrude e-tec

    Sea Raider,
    What problems did you have with the trim & tilt???

    WTFH

  9. #9
    Geoff_Atkinson
    Guest

    Re: 90 hp evinrude e-tec

    When under way the motor wouldn't tilt down (towards the boat) under 10 knots it wasnt a problem but when flat out, trying to get the boat to plane, it was.

    The dealer said it was a fairly common occurance and took about 10 minutes to fix under warranty. I dont know the exact cause.

    Hope this helps you,

    Geoff

  10. #10
    Croweater
    Guest

    Re: 90 hp evinrude e-tec

    If the 90 is anything like my 175, it will be as sweet as.

  11. #11

    Re: 90 hp evinrude e-tec

    I can do around 150 km out to the Hards and back and when cruising at around 3,000 - 3,500 rpm (which gives me around 20 knots) I will chew on average no more than 40 litres.

    You've gotta be happy with that.

    The fuel consumption on the troll is amazing.
    Open it up and you will see the guage go down!!!


    Cheers


    Mark

  12. #12

    Re: 90 hp evinrude e-tec

    Off topic replies have been moved to [link=http://www.ausfish.com.au/forum/YaBB.cgi?num=1160802499]This Thread[/link]
    Regards

    mod5

  13. #13

    Re: 90 hp evinrude e-tec

    [warnred]
    Members Kopey & Ron173 banned for 7 days for highjacking thread and posting inflammatory posts.

    Good debate and banter is fine however Moderators have had to remove several threads in recent times because of this disruptive behaviour from a minority of members. It will no longer be tolerated.

    [/warnred]
    Regards

    mod5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us