Results 1 to 10 of 10

Thread: Simrad Auto Pilot - Controller Panel

  1. #1
    Ausfish Addict Splash's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne

    Simrad Auto Pilot - Controller Panel

    Hi all.

    For the Simrad Auto Pilot setup, can it be operated via the integrated NSS Evo3S MFD and not through the separate AP44 Autopilot Controller Display?

    I don’t want to cut another hole in the dash panel if I don’t have to.


    https://chsmith.com.au/Products/Simrad-Ap44Mc-Virtual-Rudder-Pack-Inc-Ap44-Nac-2-Precision9-Rpu80.html?gclid=CjwKCAjwwdWVBhA4EiwAjcYJELUmMvIO8 2k4dbLKYvrprpjU6ML6vLreojKG63gn8Oz5WW0qZHH2wxoC09k QAvD_BwE



    Splash

  2. #2

    Re: Simrad Auto Pilot - Controller Panel

    Yes 100% can control through the MFD - works very well.

  3. #3
    Ausfish Addict Splash's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne
    Thread Starter

    Re: Simrad Auto Pilot - Controller Panel

    Thanks.

    Do you use the Simrad AP setup?

    Thoughts, tips, traps for install?

    What is the remote control unit used for?


    Splash

  4. #4

    Re: Simrad Auto Pilot - Controller Panel

    66D04902-C739-44BE-B8D5-B285BBC8EC63.jpeg

    Yes I have NSS12 Evo 3 with a NAC2 computer. Same hyd motor set up. I am also running the BT remote plus an OP12 for redundancy if the MFD has issues. Thoughts, don’t get the Precision 9 compass. For a little bit more grab the HS60 GPS compass and you wont have to worry about magnetic interference.

    install is pretty easy but you need to either get someone with the Seastar bleeder system or purchase one of the aftermarket systems that lets you bleed the air properly. That is the biggest issue - air in the system. I bought one of these for my kit;

    https://outboardst.com/product/bubbl...st-pbb-010-21/


    I have the remote on a lanyard so I can move the boat around while fighting a fish. Seriously wouldn’t be without one on any boat.

  5. #5
    Ausfish Addict Splash's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne
    Thread Starter

    Re: Simrad Auto Pilot - Controller Panel

    Awesome stuff! Thank you.

    Do you use the stand alone separate controller panel for the AP or do you integrate AP into your existing MFD?

    Splash

  6. #6

    Re: Simrad Auto Pilot - Controller Panel

    Both, they are all networked nmea2k. it just hands over control from whatever unit you are using.

  7. #7
    Ausfish Addict Splash's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne
    Thread Starter

    Re: Simrad Auto Pilot - Controller Panel

    Thanks Greg.

    Does the remote control unit allow fir point and shoot in any direction or just on / off?

    Splash

  8. #8

    Re: Simrad Auto Pilot - Controller Panel

    normal, not point and shoot

  9. #9
    Ausfish Addict Splash's Avatar
    Join Date
    Mar 2007
    Location
    Melbourne
    Thread Starter

    Re: Simrad Auto Pilot - Controller Panel

    Thanks.

    I see there exists different Controller Panels

    AP 48 Control Panel
    AP 44 Control Panel

    http://www.boatmaginternational.com/...ot-controller/

    https://www.simrad-yachting.com/simrad/type/autopilots/autopilot-controllers/ap44-rotary-pilot-head/


    Your thoughts and recommendations on both units?


    Splash

  10. #10

    Re: Simrad Auto Pilot - Controller Panel

    If you got the dash space and the money - why not but not needed if you are going to run a Simrad MFD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us