Suzuki multufunction gauge.

[gford001]

Hey. Just picked up a multufunction gauge for my 16 model DF140 (Hasn't arrived yet).
I currently have analog gauges. No NMEA network.
Been looking online at what to do.
I plan on taking out the analog tachometer gauge, putting this into the same hole.
Hoping the analog speedo can stay in and will still work?
So basically I need to
1.Set up a basic NMEA2000 network (sounds easy).
2. Unplug the cable from the analog port under the cowl, and plug it into the digital port (ill figure this out later).
3. Plug the cable for the multufunction gauge into the wiring harness (somewhere under the dash im guessing).
4. Run gauge power cable.

This it?

I have a Garmin 95SV with NMEA 0183, is there a way to plug this in, so the gauge gets MPG data as well? Guessing it needs to be NMEA2000....
Cheers
Glen.

Sent from my SM-G960F using Ausfish mobile app

[gazza2006au]

Hey. Just picked up a multufunction gauge for my 16 model DF140 (Hasn't arrived yet).
I currently have analog gauges. No NMEA network.
Been looking online at what to do.
I plan on taking out the analog tachometer gauge, putting this into the same hole.
Hoping the analog speedo can stay in and will still work?
So basically I need to
1.Set up a basic NMEA2000 network (sounds easy).
2. Unplug the cable from the analog port under the cowl, and plug it into the digital port (ill figure this out later).
3. Plug the cable for the multufunction gauge into the wiring harness (somewhere under the dash im guessing).
4. Run gauge power cable.

This it?

I have a Garmin 95SV with NMEA 0183, is there a way to plug this in, so the gauge gets MPG data as well? Guessing it needs to be NMEA2000....
Cheers
Glen.

Sent from my SM-G960F using Ausfish mobile app

Hows the boat going Glen?

Sent from my SM-G900I using Ausfish mobile app

[gford001]

Hows the boat going Glen?

Sent from my SM-G900I using Ausfish mobile app

Yeah good. Basically done.
Hasn't been out heaps though. Bit annoyed with that.....
Got a new prop off a mate to try. Got a big ding in though, so not sure if it'll go any good.
Need an interior. Cabin cushions etc.
But going back to work for another month soon, so will do that after, funds permitting of course.......

Sent from my SM-G960F using Ausfish mobile app

[gazza2006au]

Good to hear, i wouldnt run the ding'ed prop if its out of balance it can wear out your prop shaft bearings

Solas use to allow u to buy a prop with free exchange for another as long as u dont damage it might be a better option for u

Sent from my SM-G900I using Ausfish mobile app

[gford001]

Good to hear, i wouldnt run the ding'ed prop if its out of balance it can wear out your prop shaft bearings

Solas use to allow u to buy a prop with free exchange for another as long as u dont damage it might be a better option for u

Sent from my SM-G900I using Ausfish mobile app

Going to see how it goes.
If it vibrates its off, if its any good, ill get it fixed.

Sent from my SM-G960F using Ausfish mobile app