What have people been doing to their boats under isolation ?

[stevej]

im still running the quintrex supplied junk which are 3 years old now
next fortnite will go get something decent, thanks for bringing up wheels and hubs in the discussion.

[gazza2006au]

I am browsing for some seats since its raining

Really like the first picture but white screams "mold"Attachment 121814Attachment 121815Attachment 121816Attachment 121817Attachment 121818

Sent from my SM-G900I using Ausfish mobile app

[shaungonemad]

I am browsing for some seats since its raining

Really like the first picture but white screams "mold"Attachment 121814Attachment 121815Attachment 121816Attachment 121817Attachment 121818

Sent from my SM-G900I using Ausfish mobile app

They look pretty flash


Sent from my iPhone using Tapatalk

[shakey55]

I am browsing for some seats since its raining

Really like the first picture but white screams "mold"Attachment 121814Attachment 121815Attachment 121816Attachment 121817Attachment 121818

Sent from my SM-G900I using Ausfish mobile app

White = mould. Where do you get that analysis.

I’ve got 20 year old white seats in my Seafarer and no mould whatsoever.


Shakey - If only I lived near the coast

[EdBerg]

Hey Col, here is a simplified diagram, hope this makes it clearer.

Cheers
Ed.

[EdBerg]

Ed, I think I understand what you are trying to do, how has it worked out for you as I would have thought there might be enough white water coming off that transducer to keep flipping the float switch up while underway.

Yep that 1Kw transducer is large, I haven't tested this setup out as I have only just put it on last week but had the same setup on two previous boats and no problems with those.

[blacklab]

Thanks Ed............ got called out last night, so didn't get to peruse the drawing yet,,,,,

Gazza, I got the bolster seat one, flip up front and put a sliding bases on, ( only tested in simulation of course lol ) but there good for standing and leaning.... similar to the one on the left at the bottom.......

Col

[gazza2006au]

White = mould. Where do you get that analysis.

I’ve got 20 year old white seats in my Seafarer and no mould whatsoever.


Shakey - If only I lived near the coast

Shakey im thinking with covers over them in a centre console they'll get wet every rainy day even right thru winter unless i build a carport

Sent from my SM-G900I using Ausfish mobile app

[blacklab]

Gazza, when I was getting mine ( I'll try to find a Pic ) I noticed that all of the coverings they use now are mould and water proof. Dunno how long for, but I'm picking they hold up alright. I went grey, cause I'm a messy sod and I liked the grey. But I suppose if yours isn't going to be under shelter, you'd want to make up a tarp or something, dont think any of them are designed to be left out in the open.. would have thought our sun would do more damage, dunno.
Think about putting the sliding/swivel fitting underneath and maybe a fibre glass box for storage might be an advantage...

Col

[gazza2006au]

Thats a nice set up Col are the seat boxes one standard height?

The sides of my hull and transom will be grey the top and bottom of hull plus all inside will be white so i think the darker seats will set it off with either a grey or white console

Will make that choice as i progress

Sent from my SM-G900I using Ausfish mobile app