-
Ausfish Bronze Member
Motor Guide
Is it ok to charge my batteries on my boat with a 24 volt charger for the motor guide while it is working working anchoring the boat.
Will it do any damage to the motorguide. Looking at using a 24 volt 50 amp max charger. Thanks for your advise.
Sent from my iPhone using Ausfish mobile app
-
Ausfish Platinum Member
Re: Motor Guide
My motorguide manual says to disconnect the motor while charging the battery
Both positive and negative cables
If your manual says the same then there’s your answer
The gps modules play up as it is I wouldn’t risk it
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules