Results 1 to 4 of 4

Thread: rpm counter

  1. #1

    rpm counter

    where would these wires go on my evinrude rpm counter
    Attached Images Attached Images

  2. #2

    Re: rpm counter

    Common OMC wire colours for the older engines

    https://i.pinimg.com/736x/a6/2b/9c/a...-knowledge.jpg

    At a guess, Purple to 12 volt, black to ground and white (if that is white - normal harness colour would be grey) to signal (pul) . The additional terminal up the top is for the backlight. You can either add a feed off a switch or connect it to the purple wire as well.

  3. #3

    Re: rpm counter

    thanks again scottar
    snap

  4. #4

    Re: rpm counter

    Colours are as mentioned, but, you will need to set the little switch to make it read right for your motor.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us