Power cables take offs on batteries.

[tropicrows]

I've been using two12v batteries in series to run a 24v electric motor. Now I also want to run two 12v cables to electric reels. Can anyone see a problem with this setup.
Note:
1) I could disconnect the link if needed but prefer not to.
2) I wont be running the electric motor at the same time as the electric reels.20190819_094247.jpg

Sent from my [device_name] using Ausfish mobile app

[NAGG]

that's how I charge my 24 volt set up ( on board chargers) - simply have a Anderson plug connecting the two batteries .

you gust need to be mindful that you may be discharging 1 battery more than the other which will effect the 24 volt if you go to use your electric

Chris