Results 1 to 9 of 9

Thread: Sharkcat 560 - what outboard size

  1. #1

    Sharkcat 560 - what outboard size

    Hi... this may be a well worn question but was questioning what is the optimal outboard size on a shark cat 560?

    twin 70hp, 90hp, 115hp?

    thanks in advance.

    Craig

  2. #2

    Re: Sharkcat 560 - what outboard size

    115s i say. 90s a bit underpowered in a fourstroke.
    Did you make a decision?

  3. #3

    Re: Sharkcat 560 - what outboard size

    70's are slow and sluggish, 90 Suzuki's go well, lightest in that HP, 115's probably best, but you start getting up there in weight, so the old compromise comes into play, a bit more HP with a weight penalty, or less HP and better balance? as long as the boat is structuraly sound, you can put big HP on them.

  4. #4

    Re: Sharkcat 560 - what outboard size

    old 560 sharkcats seemed to run the best with twin yammie 90 2 strokes ,, so what ever modern dock matches that weigh and power curve would be a good starting point ..... IMHO cats like a torquey motor and less weight is better.

    BigE

  5. #5

    Re: Sharkcat 560 - what outboard size

    Twin 90hp 4 stroke Honda... actually go really well. Very happy!

  6. #6

    Re: Sharkcat 560 - what outboard size

    You already have the boat, but just asking what engines are best?

  7. #7
    Free Membership
    Join Date
    Jan 2020
    Location
    Brisbane

    Re: Sharkcat 560 - what outboard size

    Suzuki and Honda both have newish 100hp models, 1.5L and around the 160kg mark (derived from 90's). Seems like they have taken a similar design path, quite under-square with low ratio gearboxes, so should have very good torque at the prop for the smallish capacity.

  8. #8

    Re: Sharkcat 560 - what outboard size

    No... was looking at a 560 that needed engines replaced and then I brought a different one with it all done

  9. #9

    Re: Sharkcat 560 - what outboard size

    Couple of the new lighter 100's may be the go.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us