Classifieds

Page 33 of 34 FirstFirst ... 232425262728293031323334 LastLast
Results 481 to 495 of 507
  1. #481

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    So far so good need to weld the other broken part next than i need to use a die grinder to clean all the inside up
    Attached Images Attached Images

  2. #482

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    Powerhead going on tomorrow guys its the soonest my cousin could help, not sure about the starter when that will be ready trying to find a local shop with die grinder bits for the inside of the starter motor also low on argon 600psi left in cylinder plus car broke down and rego is due so a little low on cash, no work on boat yet due to low on funds but should be sorted in a week or two than i'll get crankin on boat again once i can get another 24litres of resin and need to order a fair bit of fumed silica

    here's a picture of the penetration on that starter
    Attached Images Attached Images

  3. #483

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    Have you tried the wreckers for a second hand starter?

  4. #484

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    If you manage to get the starter working, it will probably be OK for the interim to get the test motor, but i would consider a proper replacement down the track for reliability !

  5. #485

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    I have only looked on Ebay there are second hand starters but i would rather use mine if i have to go second hand, new aftermarket are $290 $300 but those are a 3 week wait and i don't have the cash yet, i would suspect a local wreckers would want a fair amount for a starter

    yeah it will be replaced i mostly want it fixed now to do the compression test on the new powerhead

    I'll grab this one when i have the cash https://www.ebay.com.au/itm/12V-O-B-...0AAOSwXq5ccCUN

    new or second hand out of the US both cost close to $300

    so far to repair this starter i am in it about 1 hours work but with the fluffing around with welders i am in it a few hours at lease

  6. #486

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    Hey guys taking a bit longer than expected to swap over the powerhead the other day i grabbed the air hose out of the shed leading to the air compressor and the PVC hose snapped in 3 locations and was to short to bodge to reach the outboard than i had a major crap fight with the hose fitting it was just a frustrating time compressor was playing up i only today got the compressor and hose sorted so now i can vacuum blast out the broken engine pieces from the sump, my cousin has been a little busy too he was planning on coming over sat than sun but no availability understandable when u have 8 kids

    i did have a chance to use the compressor before the hose snapped i picked up a Ryobi pneumatic air die grinder and had a whizz at the starter worked great but not the prettiest thing because i welded from the outside to the inside it looks like shit i can do a final weld and touch it up but i think it will do as is its only for a compression test and possible initial starting of the engine

    still need to weld the other side and die grind it back too so more pics... will try get everything organised to do the powerhead as soon as i can i know it is dragging out but nothing is panning out

    strangely enough there wasanother guy online seeing my starter motor rebuild and said he may have a starter to fit but needed both my leg and powerhead serial number why on earth are they following me around the internet? every tom, dick and harry wants my serial numbers its really pissing me off
    Attached Images Attached Images

  7. #487

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    to check the starter will fit

    or people are just ####ing with you because you post too much information thats not relevant to the build

  8. #488

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    I'll post whatever i feel like posting sweet heart

  9. #489

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    then put up with the crap you cop

  10. #490

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    Quote Originally Posted by stevej View Post
    to check the starter will fit

    or people are just ####ing with you because you post too much information thats not relevant to the build
    FFS Mate, give it a fricken rest Bud.........

  11. #491

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    strangely enough there wasanother guy online seeing my starter motor rebuild and said he may have a starter to fit but needed both my leg and powerhead serial number why on earth are they following me around the internet? every tom, dick and harry wants my serial numbers its really pissing me off[/QUOTE]


    May be they had a motor stolen and just checking if its there's.

  12. #492

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    Quote Originally Posted by stevej View Post
    then put up with the crap you cop
    Were you a bully at school, then stopped growin Bud ???
    Just don't post if ya dont like the guy, FFS gettin sick and tired of your school yard shite bud....

    Col

  13. #493

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    Steve i'll say this bluntly

    You have the option to post or not to post, if u canot post anything constructivly or positive than why even post? Is it to hear your own thoughts is it so you can beat your chest?

    The problem is not me your just making it my problem.

  14. #494

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    you ask why do people target you ,i replied
    you selectively respond to peoples replies and only pick the negatives

    no one wants to hear about the personal stuff they want to see your boat built and get finished

  15. #495

    Re: E-Tec, Optimax, 4 Stroke? Looking at 115hp range

    "Were you a bully at school, then stopped growin Bud ???
    Just don't post if ya dont like the guy, FFS gettin sick and tired of your school yard shite bud...."

    then block me

    also someone who selectively reads posts
    insults to form a reply and calling me a child

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us