Vacuumed my hull out this afternoon just before sunset one would be amazed how much dust comes up from a reno i had probably 5 litres of fine dust and some odd bits of long cut pieces of fibreglass laying around in there
Shes all clean now tho bloody hard to vacuum the sides like the dust just wants to stick to it
Anyhow at the base of the side pockets inside the hull someone thought it was a beauty idea to use steel screws to anchor the base pieces and screw right thru the hull like wtaf? So much they done a clean fill and paint job over the screws, when i used a 6mm drill bit to drill next to the screw all dried mud looking shit came out of the screw holes
I have all the main ones drilled out for now, some of these are floor screws they bogged and painted over too
Whoever done this job made it a nightmare
Holes to the left have been drilled thru the ones to the right rusty looking things are screws still in there
For now im just going to fill the holes next to the chine so i can glue in and glass my last 2 stringers than when im stripping the hull car paint i'll glass over the holes and repair them properly Attachment 121620Attachment 121621Attachment 121622
Sent from my SM-G900I using Ausfish mobile app