Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19
  1. #16

    Re: Jimmy Barnes blue Urushi and tiger

    mark, what glue do you use for the eva inlays mate
    and how long do you let it cure before you attack it with sand paper ?

  2. #17

    Re: Jimmy Barnes blue Urushi and tiger

    I use Selleys quik grip. Just enough to completely cover the area to be glued - I use a piece of EVA to smear it across the area but it must be fully covered and a wet coat - leave it until it's touch dry (5-10 minutes), then push the pieces together firmly. I also bang them into my bench top to make sure the contact is 100%. You can turn them straight away without any problems as long as the glue was touch dry when you press the pieces together. Sometimes I will leave them over night. Never had a problem doing it this way.

  3. #18

    Re: Jimmy Barnes blue Urushi and tiger

    thanks mate

  4. #19

    Re: Jimmy Barnes blue Urushi and tiger

    Stunning work Mark.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us