-
Ausfish Bronze Member
Another bent shaft.. 18.2kg
-
Ausfish Addict
Re: Another bent shaft.. 18.2kg
Awesome fish Josh! Keep you in tucker for a while!
What gun and shafts are you using?
Cheers.
-
Ausfish Bronze Member
Re: Another bent shaft.. 18.2kg
hey nigel, cheers mate.
the golden trev and the cobia were both with a 140 GODFATHER railgun.. just using the standard 7mm spring steel shafts, length of shaft 1900mm. 16mm rubber. doing the job but really need something stronger as both fish destroyed the shafts they were shot with during the fight.. not doing my wallet any good either haha
-
Ausfish Addict
Re: Another bent shaft.. 18.2kg
Josh you are doing really well taking those fish on that gun!
I'd definitely go the 8mm shaft for those fish, they are not only big but powerful as well. Even the 8mm will take a hammering, actually if I were encountering fish like that often I'd look at a 10mm (but not on that gun) or a slip-tip if you are fishing in deeper water. 7mm is your typical euro spear, where they are mainly shooting smaller fish up to 3-4 kg max.
Will that gun take 2 slings? You could go to 2 x 14mm if needed to power-up the heavier 8mm shaft.
Pretty good price for spring steel shafts, Riffe would cost another $25 or so!
Cheers.
-
Ausfish Bronze Member
Re: Another bent shaft.. 18.2kg
Cheers for the advice nigel,
think i'll look at upgrading the whole gun, it does take two rubbers and i have had two 16mm on it but seemed to be excessive and made it quite un-acurate. two 14's and an 8mm sounds like the go, (and a good excuse to get another gun) as i'm sure theres bigger fish to come.
cheers mate
josh.
-
Ausfish Platinum Member
Re: Another bent shaft.. 18.2kg
Holy smokes that's a beast, mate. Surprised your arms are still in their sockets!!! Roughly how far offshore are you? Awesome stuuf mate.
Cuzza
-
Ausfish Bronze Member
Re: Another bent shaft.. 18.2kg
cheers cuzza,
honestly about 30 maybe 40 feet from the stones.. the cobia and his friend were lazily cruising alongside a rather large leopard shark. shot the larger fish of the pair, then the pulling started lol.
-
Ausfish Platinum Member
Re: Another bent shaft.. 18.2kg
Ripper, mate. Great spot. Do you find the vis to be good there most of the time, or does it churn up in the stronger winds or after rain? Just wondering when it churns up there, as I have a mate who wants to start spearing there. Thanks mate.
Cuzza
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules