Results 1 to 3 of 3

Thread: Kevlacat 2400 help

  1. #1

    Kevlacat 2400 help

    Seeking some advice on a couple of issues.

    • The right hand throttle lever is quite stiff when I accelerate, I would like to have both throttle levers line up so I can throttle up with both levers and achieve the same revs ? is this easy to fix.
    • When travelling with a side on swell or strong wind should I have one motor trimed down a little more to improve the ride.
    Cheers,
    Greg

  2. #2

    Re: Kevlacat 2400 help

    Maxi,

    You either need to replace the stiff cables or if its a dual binacle control you can adjust the tension on the control if its NOT the cables causing the issue.
    Garry

    Retired Honda Master Tech

  3. #3

    Re: Kevlacat 2400 help

    keeping throttle levers in line is sometimes easy, sometimes they are right at (say) the middle, but a bit out at full, sometimes they are perfect, and indeed trim needs to be adjusted differently for side on, into the sea and so on, very common in all boats to get the best out of them, twin motors moreso, and cats even more because the motors are so far apart!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us