-
Ausfish Bronze Member
1 piece into 2 piece
G'day all
this topic has probably been covered numerous times but I have to ask.
I have a 10kg / 7foot spin rod that I was thinking of converting into 2 piece so that it travels easier. If I were to do this would there be any major disadvantages to the rods performance, and is it easy or hard?, bearing in mind that I am an absoulute beginner.
Thanks
Dave
-
Ausfish Gold Member
Re: 1 piece into 2 piece
Dave, in my honest opinion, don't waste your time. It isn't worth the time or the hassle. Go out and buy a 2 piece that suits your purpose. If you really want to do something, I'd get a good 2 piece blank and build that up. To make your fibreglass rod into a 2 piece would involve fitting ferrules and WILL affect the performance of the rod. Too much hassle for what its worth.
Regards
Mark
-
Ausfish Bronze Member
-
Ausfish Silver Member
Re: 1 piece into 2 piece
I have turned a few 1 piece rods in to two piece.
unfortunately
* it was not a planned conversion
* they were not even pieces.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules