Results 1 to 4 of 4
  1. #1

    Building Spinner Baits

    Does anyone know where to get the wire to form the coat hanger on spinner baits, it needs to be some form of hi tensile wire, I also require the mould to make the lead heads.
    The Goodoogetter.

  2. #2

    Re:  Building Spinner Baits

    Thomas Marsh Springs.

    Carol Park area in Brisbane.

    Check em out in the Yellow Pages under Spring manufacturers I think.

    Hope this helps.

    Regards, Randall.

  3. #3

    Re:  Building Spinner Baits

    Hi Goodoogetter,
    Jeff might be able to help at
    as he is into building spinnerbaits now and a top bloke to boot.
    Cheers Luke

  4. #4

    Re:  Building Spinner Baits

    Thanks Luke I will give luresonline a try, I have the spoons down pat, it takes me about 3 min to turn them out in stainless steel and I have 4 shapes that spin and produce different pulses from a heavy beat to a hi speed spin.
    The Goodoogetter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Join us