PDA

View Full Version : Help! can anybody ID this boat?



Roscoe
12-04-2002, 12:10 AM
I bought a boat from a navel officer who said the boat was made in Australia. It is 27' long and he called it a THUNDER. It looks like the 6.7m center consol made by Alucraft. It also looks like an mexican super Panga. It's beam is only 51/2' wide. But rides really nice. I'm trying to find some specs, or the maker. I'm putting a T-top on it and need to know how far I can drill down into the floor. Also would like to know the max. hp I can put on it. Your help would be greatly appreciated. The Salmon are biting and the tuna bite is coming. I really want to get out of the sun! If you have any Idea, please E-Mail Ron,THANKS/ ponciarl@lavc.edu

adrian
14-04-2002, 12:29 PM
how about a photo
anzac

Roscoe
16-04-2002, 09:40 PM
Thanks for responding anzac! I will get one on here ASAP-Thanks again-Ron

Roscoe
18-04-2002, 03:03 AM
Here are the pictures. I believe it's a '92 and supposedly a Thunder, however, after looking at all the sites accessible to me I've been unable to find a "Thunder."

Roscoe
18-04-2002, 03:05 AM
Photo 2

Roscoe
18-04-2002, 03:05 AM
Photo 3

Roscoe
18-04-2002, 03:06 AM
Photo 4

Roscoe
18-04-2002, 03:06 AM
Photo 5

Amberjack
20-04-2002, 07:41 AM
G'day Roscoe

First off:-

You're parked on the wrong side of the road!!!!! ::) ;D ;).

That's a bodgie number plate . and

The boat is not unlike a Yamaha centre console. I will follow that up for you and get back on it.

AJ :o ;) ;)

Roscoe
21-04-2002, 02:01 AM
Thank you AJ, I'm looking forward to hearing back from you. Any help would be greatly appreciatted-Ron