Tinny floor & decks

[fishsmith]

I've got a stessco 4.2m catcher that I would like to add a full floor,front and rear casting decks into.Anyone have any tips,advise or know of a place where you can get the job done at a reasonable price..etc....etc..


Smithy.....

[Big_Kev]

Welcome back Smithy.
Sounds like a bit of a project.
If you go and see Ross at Formosa boats at Wakerly he will be able to do any alluminium welding for the floor frame if need be, or Sea Quip at Capalaba.
I made the front deck for my boat myself and covered it with carpet. I used 19mm ply and waterproofed it.
If you are a bit handy I would think that a front deck for your boat will not be hard and you may even be able to get away without any welding for this.
But a full floor needs plenty of suport to hold it up and make it solid.
PM me if you need any contact details and I will write the number down when I drive past next.
Hope this helps.
Cheers Kev

[brumbs]

i have set a new company up on the goldcoast specialising in marine modifications
if i can be of any assistance please contact me
brum.b's welding and farication pty ltd
19-292 brisbane road labrador

ph-0755293334