sticky problem

[caloundra]

any advice

the tinnie i recently bought was covered in stickers i have removed them and cleaned the boat in ali-brite which made the rest of the boat clean but where the stickers were is still dull i tried eucaliptus oil, took the leftover glue of but is still dull
any ideas ???

[snapperhead]

Have you tried to ali-brite after removing the glue, it probably just didn't penertate the glue.

[caloundra]

thank snapperhead


[smiley=hammer.gif]makes sense. i used the whole bottle so might have to buy some more.

[snapperhead]

LOL....mmmmmmmm shinny ;D to easy

[Muddie]

if it is still sticky thats the problem.if the stickers have been there for a long period of time the sun may have changed the colour of the boat around them,i know it happens with paint but not sure if its the same with aluminium

[coasty]

Try K&M fiberglass polish. i use it on my bullbar . brings it up like new. straight truckwash also gets stick muck off. i used it when i took the old company sticker off the cruiser .

[adriancorrea]

Bloody hell :o :o
nasty, ouch

Tight Lines
Adrian

[goodoo]

try scrubbing the ali with a scotchbrite then use your tinnie polish willend up heaps shinier than new

[goodoo]

try scrubbing the ali with a scotchbrite then use your tinnie polish willend up heaps shinier than new

[basserman]

when i removed the old company sickers off my ute i used just plain cutting compound and that worked a treat whole tray is as shine as a new one :D

[caloundra]

thanks for your help [smiley=2thumbsup.gif]