Triler setup - Help

[Traveler]

Hi,
My boat seems to lean over to the right on it's trailer, and I was wondering if anyone can help me work out if it is ok or if I need to adjust it.
It is a multi link trailer drive on trailer. ie no keel rollers.

Appreciate any help I can get.

[jocool]

The multi rollers are normally set up with 4 rollers per shaft. This shaft is connected to the trailer on a slip yoke that is adjustable. Check that the shaft hasnt slipped down by measuring the distance from the trailer crossbar to the base of the roller axle on each bracket. If they arent all the same then you have to adjust it. Its not very difficult. Once you have a gander under the trailer you will see what I mean! 8)

[Traveler]

[smiley=2thumbsup.gif]
Thanks jocool, I had a quick look and see what you mean. I'll have ashot at it tomorrow.

Regards
Traveler