PDA

View Full Version : Bolt Lost



falcon01
15-04-2006, 09:55 PM
Hi I own a 15hp merc super and I have just lost the small screw that goes in the hole it is the same size as the lower gear filler screw should I be able to get a new one from my local merc service centre

Blackened
15-04-2006, 11:29 PM
G'day
Can't see why not. Failing that, try the local outboard wreckers.
Dave

finga64
16-04-2006, 07:55 AM
This might be a silly question but which hole??

blaze
16-04-2006, 08:05 AM
sounds to me from descibtion it may be the oil drain/fill hole, if thats the case i think they are all generic
cheers
blaze

finga64
16-04-2006, 08:54 AM
Or it could be where you screw the flushing attachment. Those little suckers are so easy to loose. I made a longer one out of a S/S bolt and nut (and a fibre washer) and then put a "t" on the top so I don't have to dig out the screw driver everytime I flush the motor. And it's easy to find ;)
Hope you find one??

blaze
16-04-2006, 09:37 AM
your probably right finga
cheers
blaze