View Full Version : SUZUKI HELP
SunnyCoastMark
06-08-2006, 09:04 AM
Hey Guys,
I'm just rebuilding a Suzuki 1982 DT50. Outboard - Replaced Thermostat, Head Gasket, etc, etc, etc.
Does anyone know what the tightening torques are for the head bolts?
I'm putting this motor on an old 15" Quinnie which I am currently also re-fitting out.- Making & fitting Ally centre console, Outboard well, raised foredeck, etc, etc.
Picked up the boat, gal trailer and motor for $1100 - someone had started the project - and you know the rest ::)
I'll see if I can start a thread, post photo's etc. - When I work it out. ;D
Any help would appreciated (with the outboard ft/lbs specs)- Thanks.
Mark
Blackened
06-08-2006, 12:18 PM
G'day
all i could suggest is, short of finding a suzi fanatics website ot trolling thru i-boats, just call the local marine dealer. Thay'd have to have a mechanic there who could tell you what you needed to know?
Dave
wessel
06-08-2006, 04:01 PM
You could think about getting the manuals online from Seloc.
If I remember correctly it is about 37 US$ for a three year online subsribtion.
They have every procedure with pictures to guide you. Well worth the money mate.
fearing the wrath of the mods ;), just go to google and type in seloc online. Follow the link and hunt down your model engine.
Good luck
Wessel
SunnyCoastMark
06-08-2006, 04:23 PM
Dave,
Been to Iboats, to much conflicting info. I knw - should have come here first. ::)
Wessel,
Sounds like a good idea - I might have to bite the bullet and do that.
Thanks guys.
Mark
SunnyCoastMark
06-08-2006, 04:39 PM
Bugger, Just been to seloc - they only have the manuals from 1988 on :-[
Any one know the approx torque settings? Or have a manual they can have a look in for me?
Mark
emuparkpete
06-08-2006, 06:15 PM
yeah, specs here mate :
1982 DT 50 (cylinder head bolts) - 6mm bolts = 6-8.5 ft.lb. / 8-12 Nm
- 10mm bolts = 29-43.5 ft.lb. / 40-60 Nm
Checked and double checked manual for your peice of mind, although you're on your own from here.
Cheers mate , Pete.
shandos
06-08-2006, 06:59 PM
Pete and I are reading from the same manual -- right on.
Had a DT 40 and then a DT 50 for years on my centre consul -- never had an ounce of trouble and they got worked hard -- launching through surf at double Ialand point.
Best of luck with the rebuild
Shandos
SunnyCoastMark
07-08-2006, 07:42 AM
Hey Pete & shandos,
# Thanks heaps guys - well done! :)
What a great chatboard - there is always someone who can help out!
cheers guys
Mark
Free pdf parts list and exploded view here...
http://store.brownspoint.com/pdf/DT50_65(80-82).pdf #
at here
http://store.brownspoint.com/microfiche.asp #
BTW They are a good old motor and a pioneer for the new breed of Suzi's... ;)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.