PDA

View Full Version : needed wiring colour code for omc tacho



wayneoro
12-09-2006, 09:09 AM
think i,ve blown one up like to play safe with my last one which wire to pul grn 12v plus the pul rev dial is set about 2 1/2 is this correct for a johno v4 thanks

ryank
12-09-2006, 05:29 PM
hey mate
ill try get a wiring diagram tomorrow and ill try send through tomorrow night some time.

Spaniard_King
12-09-2006, 06:23 PM
pul is Grey
12V is purple
grn is black

not sure what the tacho setting is for V4

Garry

wayneoro
13-09-2006, 05:26 AM
thanks mate go honda

fishingjew
13-09-2006, 06:53 AM
Outboard Tachometer Applications

This might help a bit

wayneoro
14-09-2006, 03:30 AM
thanks fishingchew i looked at that site i think my pulse is [12] the dial is 1 to 6 ? i conected it up the gauge was on 2500 and slowly moved to 3500 then back so cant be right i put a multi meteor on showed 12 volts motor going or not cheers

BaysideMarine
14-09-2006, 05:54 AM
Set your tacho to 6.

wayneoro
24-09-2006, 10:32 AM
gees gary purple is pulse grey is 12volt

fishingjew
24-09-2006, 10:44 AM
wayneoro


http://www.findboatparts.com/tech.htm#tachometers

have a look on this site

Spaniard_King
24-09-2006, 02:40 PM
gees gary # #purple is pulse grey is 12volt # #



Wayne, unless someone has managed to change the johnson/evinrude wiring guidelines all purple wires on those engines are 12v supply ::) ;)

Garry

wayneoro
24-09-2006, 03:15 PM
okay gary when i was ordering parts off goldenseal in melbourne i ttold sean i had no currant at the tacho he told me yo check the wiring as purple is pulse grey 12volt black is gr and now i have it working not right but getting 12volts ? no worries mate

wayneoro
24-09-2006, 03:34 PM
thanks fishing jew just what i needed and that says the colour are as gary said ? life is to tough for me bm there is a trap here it is actually 6c which is directly opposite of 6 do i really need a tacho cant be worth this cheers guys

wayneoro
26-09-2006, 05:01 AM
just when i though i understood went back to site fishingjew gave us and there is a list of international wiring colours eg red is pos black is neg purple is tacho ?

Spaniard_King
26-09-2006, 05:04 AM
Wayne,

Unless your engine has aftermarket wiring (ie someone has rewired it) go with my original wiring schedule

Garry

fishingjew
26-09-2006, 08:25 AM
Wayne


As Garry said pulled mine out of dash

purple 12volt
grey signal
black ground
poll 6p