View Full Version : Is this how it goes?
14-11-2005, 07:42 PM
Dual battery setup, this is how I had planned to do it, was I about to fry something?
15-11-2005, 03:29 PM
15-11-2005, 04:18 PM
thats how we run ours with no probs
we just fully rewired a 6.5mtr boat with no probs at all just remember to use a good quality wire and a fairly heavy main wire for your accessories cause we use alot of elctronics these days we have 15 switchs on our new boat so the wire has to be heavy enough to run all if we used them all at once
15-11-2005, 05:37 PM
Yep, that'll work just fine.
Only thing I would add would be a 15A fuse as close to the switch as possible to feed your accessories.
15-11-2005, 10:53 PM
Ok, great, thanks for the input guys.
16-11-2005, 12:52 PM
.....and use tinned wire and at the joins use a heatshrink with the resin in it for waterproofing. Solder joints, don't use the crimp connection thingos.
Good luck on the project. ;)
Powered by vBulletin™ Version 4.1.3 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.