View Full Version : How to cover a hole in aluminum floor used for swivel seat
Pedro14
22-06-2016, 03:30 PM
Have a Try Gull boat with an aluminum floor, and space for 3 swivel seat, which are enclosed holes in floor
Normally only use one and when it rains the 2 not being used , fill up with water.
Any suggestions for a simple solution to cover the holes , yet leave the carpet above mostly undisturbed.
Thanks
Pedro113396
Chris Tucker
22-06-2016, 03:44 PM
Measure the holes and order some full depth plastic plugs from someone like this: www.plasticcenter.com.au (http://www.plasticcenter.com.au). That way you're not damaging the structure and if you ever want to hole the mounts again you just have to pull the plugs out.
Pedro14
22-06-2016, 05:08 PM
Measure the holes and order some full depth plastic plugs from someone like this: www.plasticcenter.com.au (http://www.plasticcenter.com.au). That way you're not damaging the structure and if you ever want to hole the mounts again you just have to pull the plugs out.
Thanks Chris, a good suggestion
Noelm
22-06-2016, 05:09 PM
Depending on the size, lots of manufacturers have plastic plugs to suit all the "standard" ones, failing that, places like Spacepack have just about every plastic plug known.
Noelm just stick a bit of pool noodle in it ,or just use some heavy density foam from the clark shops
Pedro14
23-06-2016, 08:29 AM
Thanks for all the suggestions.
Inspiration came to me last night and a sink plug did the job,
113401
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.