PDA

View Full Version : Thickness of Plasrtic Tie to release stuck Reef Anchor



PeterInSA
27-12-2015, 08:36 AM
My Anchor Chain is connected to a 450mm stainless steel cable that is D linked to the bottom of the anchor and the top of the anchor ( with the hole) is Plastic tie'd to the SS Cable.

The theory being that if the anchor is stuck on the bottom I pull on the anchor rope hard and break the plastic tie. With the anchor rope, chain and SS cable being joined onto the prong end of the anchor, I can then simply pull the anchor up.

Question I am using a plastic tie approx. 6mm wide and 1mm thick. Is this tie to hard to break?

To me the police use similar to restrain the unruly

Thanks

Peter

Dan5
27-12-2015, 09:01 AM
You would be going hard to break a 6mm cable tie at the end of 30mtrs of rope by hand............usually you would tie it off on the bollard and let the boat do the work.

PeterInSA
27-12-2015, 10:30 AM
Thanks Dan,
Will also look at a smaller Plastic tie, just in case I don't have the bowsprit in line and put extra pressure on that.

Peter

scottar
27-12-2015, 10:34 AM
The boat will break a 6mm tie easily. It doesn't feel pain

stue2
01-01-2016, 01:47 PM
We use 2 or 3.
If its a bit choppy 1 isn't enough

Sent from my SM-G900I using Tapatalk