View Full Version : Transom bolts on glass boat
gpz1991
11-05-2013, 07:27 PM
Hi all this may be a stupid question but I have lifted my motor and was wondering how tight to do the transom bolts back up
Ta
johncar
11-05-2013, 08:12 PM
Good question, I had to do mine last week and it occurred to me that there probably is a recommended torque and I assume that it would be in the realm of the engine manufacturer to specify. I have been doing this stuff all my life so I have a pretty good feel for what is adequate without breaking things.
I was just looking quickly and found a mercury spec sheet which may get you in the right direction but you should try and check with your own engines spec if you can find it but I would think that they would all be similar.
http://marinepartsexpress.com/Merc_Prod_Bull/Bulletin%20No.%202010-70%20Bulletin%20No.%202005-12.pdf
myusernam
11-05-2013, 08:30 PM
Ft .
gpz1991
11-05-2013, 10:07 PM
Thanks johncar, mine is a mercury any way
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.