trailer spare wheel

[MEG-A-BITE]

Any one here suggest a place, north of Brisbane to get a spare rim and tyre for the boat trailer. Size 175 80 13 Holden rim.

[rtp1984]

Trailer spares direct Paisley drive at Lawnton. That's where I got mine. there is a tyre shop 3 shops up from them that fitted a tyre on the rim as I waited.

[sandbankmagnet]

Northside Marine could probably help too.

[Noelm]

almost any boat place will have spare wheels, complete with a rubbish Chinese tyre, but they are OK as a spare, might pay to get the multi fit job, that fits both Ford and Holden, that way, you might be able to help out someone in trouble on the highway!

[MEG-A-BITE]

Thanks im looking for 13 4.5 rim.I think they are Ford rims nt Holden.

[Greg P]

Probar @ Caboolture if you are up that way. Good guys.

[Rodman]

Mate also try a boat trailer or even a box trailer manufacturer at brendale

Ken

[Noelm]

Most boat shops will charge around $170-$190 for a complete 13" galvanised multi fit (Holden and Ford together) spare wheel (with tyre of course), you can get a bit cheaper by shopping around for a rim, then a tyre, but maybe, in the end, it is just easier to wander in, pay your money and leave.

[Crunchy]

Northside Marine could probably help too.

+ 1, carry quite a wide range and their prices seem to be reasonably competive (No asscoiation)

[MEG-A-BITE]

Stupid question.Whats the difference between the Holden and Ford rim? How do you know which rim you have? This is a 5 stud 13 rim and if I take a measurement on the studs its 4.5in

[johncar]

Hi Meg-a,
Don't know the stud diameter in inches but, Falcon hubs use 1/2" UNF studs at approx 68mm centres stud to stud and early Holden HT use 7/16" UNF studs at about 64mm centres stud to stud.

[timddo]

I live on the west side and have a few spare ford 13 inch dunbier tyres and rims.

Free if you are handsome .;D