captain red beard
10-08-2012, 03:14 PM
I have these tabs fitted on my boat and they havent worked for a while. They were already fitted to the boat when I bought it.
I found the fault codes and it appears that both tabs are stuck/seized. Wont go down, make noise, just the lights on the panel start to flash. I have searched ausfish looking for answers but can only find problems with the module. My module appears to be high and dry, not showing any signs of corrosion.
Do they just need to be replaced or could there be another problem. Are they able to be pulled apart and cleaned, lubed up etc
Cheers Red Beard
I found the fault codes and it appears that both tabs are stuck/seized. Wont go down, make noise, just the lights on the panel start to flash. I have searched ausfish looking for answers but can only find problems with the module. My module appears to be high and dry, not showing any signs of corrosion.
Do they just need to be replaced or could there be another problem. Are they able to be pulled apart and cleaned, lubed up etc
Cheers Red Beard