PDA

View Full Version : Stessl 4.6 try hull center consul tidy up



DATCOL
21-05-2012, 12:20 AM
Hi all we have baught a early stessl that has been living under the trees for the past few
years so it neaded a new floor & a bit of a scrub
The trailor also neaded som T L C
we have been working on it for the past 3 weeks & it is starting to look like a boat should
I will try to put some pictures up of it when we started & will take some more now as it is Progressing How do thes Try hulls go on water Do they have any problems
Cheers DATCOL
L80300
80301803028030380304

Drifty75
21-05-2012, 07:33 AM
:-? Your console is facing sideways!!!

Can't wait to see the progress on this.. :)

Goodoo haven
21-05-2012, 09:36 AM
Be good to see how this boat comes up.

Are you doing it up for yourself to keep or will you be selling it when you finish it?

DATCOL
23-05-2012, 09:05 PM
8046980468Goodoo haven My cousin from Mackay has bought the boat to use so wont be sold for a wile (i hope any way lot of work to get it right) but slightly modified now
Trailer has been cut & shut with new box section replacing the rusty bits & a few new rollers
Its now ready & waiting for the boat be completed

Goodoo haven
23-05-2012, 10:15 PM
The trailer looks nice. Your doing a good job to the restoration of the boat and trailer.

DATCOL
24-05-2012, 10:38 PM
80493804928049180490Hi we have made a bit of progress with this project as follows
1/ All floor panels cut from 3Mm alloy &sitting in place to be fastened down
2/ A dry storage bin about 50 litre under floor in front of the console
3/ doors on the center consul
4 / Alloy Bimini top on the consul with plats for nav lights aerials & front & rear facing led work lights
5 / In floor kill tank about 45 liters with drain to rear bilge pump airier
6 /Esky approx 70 liters with cushion & 2way swing back rest helm seat
7 / Fuel tank under floor 70 liters
8 / Port side rear corner plumed live bait tank with a cushion seat over the top
9 / Bait board with sink & 9 rod holders with a small open drop box under it for the bits & pieces you use wile fishing pliers, knives, sinkers, lures, etc
10 / Transom duck boards & folding boarding step

DATCOL
24-05-2012, 10:58 PM
The hull has now been striped & re sprayed Still have the wiring & re fit the internals sounder etc
All the top work aeries that haven't been painted will be done with clear shark hide protect ant
Cheers COL

Goodoo haven
26-05-2012, 10:48 AM
I am impressed how the boat is coming up. Its looking real good