PDA

View Full Version : New anchor, and a bit off bling



Jabba_
22-04-2011, 04:12 PM
I got sick off bending my bow sprites, so I had one custom made to fit my new Stainless anchor.. I told John I wanted it built strong as I had already bent 4 off the shelf bow sprites. While I was at it, I replaced my worn out Quick winch with a new V700 Lewmar and finished it with a Force anchor swivel and a meter off stainless chain just to finish it off.. I do like the look off polished stainless steel ;D


http://i5.photobucket.com/albums/y159/jabba1/Boating%20camping%20and%20fising/Iphone015.jpg

rosco1974
22-04-2011, 04:31 PM
very nice mate

Jarrah Jack
22-04-2011, 05:19 PM
Looks good Jabba, shame to put it in the mud really. I made my own bowsprit out of red ironbark and its holding up well so far.

Nice polished pop up cleat there as well. No scratches on the rubber either. What year is the boat?

Jabba_
22-04-2011, 06:11 PM
Thank you Rosco and JJ..

The boat is a 2003 Seafarer Vermont.. I upgrades the original cleats for for those flush mounted pop up cleats. It improved the look off the boat heaps.. That red iron bark bow sprite would look nice, how about posting up a picture..

Pic off the old cleat and winch
http://i5.photobucket.com/albums/y159/jabba1/Boating%20camping%20and%20fising/Attitude006.jpg

Jarrah Jack
26-04-2011, 08:20 PM
Here you are Jabba. It looks like it could do with a polish though. Notice that nice bit of stainless in the top right corner. I think yours is better.:)