sporty1
01-11-2010, 09:31 AM
Hi guys
went to install my Lenco tabs yesterday. But I have a problem with where to place them on the transom. It is so narrow at the side and with the ladder and a bottom strake I am unsure on what to do.
If you look at the pics I have as a guide taped and marked them on the transom about 200mm in from the side and across a strake on the bottom of the hull.
If I place them any further out towards the side, the bracket on the ram is above the hight of the transom and cannot be attached. The boarding ladder is also a problem. I have the 12" x 4" tabs and the short Rams 250mm. I could grind a bit off the bracket on the ram and it will just fit at a wider point but I am reluctant to do this if they will still function in the current position.
Any solutions would be appreciated.
Attached Thumbnails - Click to enlargehttp://www.ausfish.com.au/vforum/attachment.php?attachmentid=62768&stc=1&thumb=1&d=1288559366 (http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62768&d=1288559366) http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62769&stc=1&thumb=1&d=1288559645 (http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62769&d=1288559645) http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62770&stc=1&thumb=1&d=1288559645 (http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62770&d=1288559645)
went to install my Lenco tabs yesterday. But I have a problem with where to place them on the transom. It is so narrow at the side and with the ladder and a bottom strake I am unsure on what to do.
If you look at the pics I have as a guide taped and marked them on the transom about 200mm in from the side and across a strake on the bottom of the hull.
If I place them any further out towards the side, the bracket on the ram is above the hight of the transom and cannot be attached. The boarding ladder is also a problem. I have the 12" x 4" tabs and the short Rams 250mm. I could grind a bit off the bracket on the ram and it will just fit at a wider point but I am reluctant to do this if they will still function in the current position.
Any solutions would be appreciated.
Attached Thumbnails - Click to enlargehttp://www.ausfish.com.au/vforum/attachment.php?attachmentid=62768&stc=1&thumb=1&d=1288559366 (http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62768&d=1288559366) http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62769&stc=1&thumb=1&d=1288559645 (http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62769&d=1288559645) http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62770&stc=1&thumb=1&d=1288559645 (http://www.ausfish.com.au/vforum/attachment.php?attachmentid=62770&d=1288559645)