PDA

View Full Version : mercury black max prop



nigelr
06-10-2010, 04:37 PM
My new Tojo M90A came with a Merc Black Max prop.
Nice prop, but the diagonal play on the shaft is unacceptable, no way I would use it as there is sufficient play to cause the prop to rub against the gearcase.
Upon examination, it appears the Pro-Torq III hub kit has been used.
I suspect the Pro-Torq II is the correct hub kit.
Can anyone confirm that the correct hub kit for this set-up is the Pro-TorqII?
Cheers.

Steeler
06-10-2010, 04:50 PM
I am with you i am thinking a Flo-Torq II hub assembly kit, Merc part # 835257K1 or Quicksilver 835284Q1 your is what they refer to as a " D " size prop.

hino310
06-10-2010, 05:54 PM
If its a new motor it should be 100% right. Wherever you got your motor from, get them to sort it out.

Jarrah Jack
06-10-2010, 06:29 PM
Hey Nigelr

Is the motor for the Lancer? I'm interested to know how the boat is coming along, got any pix of the transom work.....etc

Cheers

nigelr
06-10-2010, 06:35 PM
Hey Jack, yep on the Lancer, work is progressing slowly but surely. Was hoping to get into it over the long weekend but 3 days of non-stop rain put an end to that idea!
Will take a pic or two tomorrow.
Cheers.