View Full Version : Mobile Fibreglassing southside brisbane
theangryangler
14-06-2010, 06:31 PM
Hi all,
After someone who does mobile fibreglass repairs/reflooring work for spme work on a 7 meter cat.
Has to be mobile as boat is in my backyard!
thanks in advance.
The Angry Angler.
theangryangler
14-06-2010, 06:31 PM
sorry forgot boat is located southside of brisbane
http://www.ausfish.com.au/vforum/customavatars/avatar35202_1.gif (http://www.ausfish.com.au/vforum/member.php?u=35202)Grand Marlin is your man for that .Does great work. Good tradesman. Do a search for Grand Marlin. On ya Pete.
David
theangryangler
14-06-2010, 09:15 PM
Any on the goldy? bit closer then grand marlins place
theangryangler
15-06-2010, 07:21 AM
bumpity bumpity
ozscott
15-06-2010, 07:42 AM
There is a fellow called Benny - does really good work. Been around a long time. He used to work for Arnold at Arnold's fibreglass....(he has left there).....
I can get his details if you want.
Cheers
Blackened
15-06-2010, 07:57 AM
G'day
Bloody hell, has Benny finally left there?
Dave
Sandman
15-06-2010, 09:00 AM
Sorry to drop in on your thread but what would recoat of gel coat etc cost on a 6.5mtr boat anyone have ideas ? Maybe i should talk to Pete myself , while he is at it he can install a new sounder for me :)
Spaniard_King
15-06-2010, 09:05 AM
Is jacobs Well Close enough for you call ADAM 0404050310.
There is nuthing this guy cannot do and he does it at a fair rate.
Some of his work here http://www.ausfish.com.au/vforum/showthread.php?t=150417
ozscott
15-06-2010, 09:24 AM
Yep left there Blackened. At the moment if you want to check out some of his custom work there is a nice Reef Runner at the Merc dealer at Cav Road...
As for re-gelcoating...I dont think thats possible, but a full rub back, fill, base coat and industrial 2 pac finish (if you take everything off yourself - gunnel rubbers, fitting etc) for that size boat is about $8,000 to $10,000 based on a recent quote I got for my Vag.
Cheers
Blackened
15-06-2010, 09:41 AM
G'day
You can re gelcoat, but it's not very common.... 2 pac is the way to go. How bad is the gel coat that's on there now?
Dave
ozscott
15-06-2010, 09:53 AM
Thats interesting...didnt know that could be done mate. I thought the problem with 2 pac was that it was as never as robust or deep as gel coat, although Benny was telling me that there is an industrial 2 pac that as long as you let it get about 6 months old before scratching it gets really hard.
Cheers
Vitamin Sea
15-06-2010, 10:32 AM
Yep left there Blackened. At the moment if you want to check out some of his custom work there is a nice Reef Runner at the Merc dealer at Cav Road...
As for re-gelcoating...I dont think thats possible, but a full rub back, fill, base coat and industrial 2 pac finish (if you take everything off yourself - gunnel rubbers, fitting etc) for that size boat is about $8,000 to $10,000 based on a recent quote I got for my Vag.
Cheers
Gees, that's a number Scott
Would not spend it on the boat
Cheers
Bill
Sandman
15-06-2010, 11:18 AM
G'day
You can re gelcoat, but it's not very common.... 2 pac is the way to go. How bad is the gel coat that's on there now?
Dave
Thanks Dave,
Not bad enough to spend 8k on thats for sure , but 2 pac sound interesting .
Regards Mick
ozscott
15-06-2010, 12:41 PM
Sure is a big figure Vitamin C...I was only mildly curious. Mine is still in pretty good nick. I would never spend that sort of dough on an old boat even one I like as much as the Vag.
Mick - that $8-10k WAS for 2 pac...
Cheers
Grand marlin does mobile work as well, I think
David
theangryangler
15-06-2010, 04:30 PM
do any of these guys do mobile work or only in the shop??
thanks for all the replies too.
ozscott
15-06-2010, 04:33 PM
Benny does mobile.
Cheers
theangryangler
15-06-2010, 05:14 PM
possible to PM me his contact details
thanks again
Blackened
15-06-2010, 06:48 PM
G'day
PlayPen was gel coated if I remember correctly, and he's right in saying the two pac is much thinner, that's the nature of it.
Maybe you could get away with a really good cut back, polish and wax.
Dave
ozscott
15-06-2010, 09:24 PM
I will get his details for you mate.
Cheers
theangryangler
15-06-2010, 09:49 PM
cheers mate.8-)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.