View Full Version : furno LS4100 PROBLEM
39NESP
03-03-2010, 06:48 AM
my LS4100 in 52 mt water i get a very poor reading without zoom or
bottom lockdoes any body have one of these sounders they can show me pictures of in or around this depth
cheers snap
TimiBoy
03-03-2010, 08:33 AM
my LS4100 in 52 mt water i get a very poor reading without zoom or
bottom lockdoes any body have one of these sounders they can show me pictures of in or around this depth
cheers snap
Did you used to get good readings?
How is the transducer set up?
What power is the transducer?
Does the sounder have 200/50 Hz option? 200 at this depth should work a treat.
Do you have a gain adjustment on the sounder?
Once answered, we should be able to help!
Cheers,
Tim
39NESP
04-03-2010, 11:09 AM
Did you used to get good readings?NO
How is the transducer set up?JUST BELOW OF BOAT
What power is the transducer?300 WRMS
Does the sounder have 200/50 Hz option? 200 at this depth should work a treat.YES
Do you have a gain adjustment on the sounder?YES
Once answered, we should be able to help!
Cheers,
Tim
CHEERS SNAP
TimiBoy
04-03-2010, 02:42 PM
was the system installed by the supplier, or by whom?
Can you supply a photo of the transducer as attached to the boat?
Cheers,
Tim
honda900
04-03-2010, 02:56 PM
Snap,
the electronics forum has a sticky (top of the list) sounder reading, has very useful configuration information for the furuno's may not quite be your model but may help you, also has a bunch of images from really deep water off tasmania.
Regards
HOnda.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.