PDA

View Full Version : Mounting downrigger to Kevlacat



perko
22-11-2009, 08:50 AM
Anyone got thoughts on where to mount a downrigger on a kevlacat 2400? Would it be better between the motors or on a side put at a 45 degree angle to the transom? I have a Cannon Uni troll 10 with the extendable boom.

finding_time
22-11-2009, 06:10 PM
Perko

Mate i run mine on the port side at 45 degrees, it works fine but you do have to be careful that it doesn't hit the motor cowl when you raise the bomb!

julian1
22-11-2009, 07:56 PM
i run mine out of the rear corner with no problems

sleepygreg
22-11-2009, 11:28 PM
definitely off the corner...too much disturbance beteween the motors.

Greg