Need Some Help

[ON-THE-CHEW]

I am after a recomended aluminium welder/fabricator. I own a 5.5m Galeforce (see picture) centre console and I am very interested in putting a nomad style cage in the front of it (see picture).

I am very interested in getting more into the popping and jigging seen, and after being on a nomad trip was very interested in setting up something similar on my boat, as it is so much a safer and betting fishing platform for those styles of fishing.

Already had some success with this style of fishing but this would get me out more often.

I am just after any recomendations of business who would give this a go, looking at probably up to 2inch polished aluminium. I live in the redlands so close by would be of benefit but not necessary.

Andrew

[stinky-stabi]

try sid fishes if im correct he does that sort of work

[lethal098]

call Shaun at topflight sprayworx, he does all fabrication and pipe bending he is at Caboolture 54993838. cheers Lee

[ON-THE-CHEW]

Thanks guys will update on any progress, have had a bit of luck so far in the boat with this style of fishing but the cage will make it so much better.

Andrew