PDA

View Full Version : still havent worked out What breed of boat this is



boatboy72
14-02-2009, 09:34 PM
:wut: can anyone tell me what make and model this boat is?
she runs twin in boards (holden 6's at this time possibly something else before hand) and is 21 - 22 foot in length
she has a massive flare in the bow unlike any i have seen before

FNQCairns
14-02-2009, 09:38 PM
Without the flare I would call the general shape for an old savage, the flare is ugly but smart none the less, will be interesting to hear if you get a positive ID.

cheers fnq

Mindi
14-02-2009, 09:53 PM
amazing....my pick is an old International Marine (Carribean, Pride) as the hull shape and windscreen are very reminiscent of a 20ft Pride runabout I had in the 70s....not the same...this is older I reckon 60s....maybe even imported.

Roughasguts
14-02-2009, 11:15 PM
I'M thinking American Glastron or something similar.

finga
15-02-2009, 06:53 AM
Sorry about not knowing what it is...but I like it :D
Any pictures of the inside??
twin Holdens...gotta be good
Walk through transom and duckboard out the back. Beauty ;D

Mindi
15-02-2009, 07:04 AM
post it on TheHullTruth.com and they will identify it in a second if from USA

juju
15-02-2009, 10:35 AM
Looks very much like a boat in a old book i have here...its a US book..same bow..different angle pic but looks like it

Tim_N
15-02-2009, 12:13 PM
It has sort of Swiftcraft bow on it, not sure though.
Tim

boatboy72
15-02-2009, 05:34 PM
xxxxxxxxxxxxxxxx

TJ Bear
15-02-2009, 06:52 PM
With a Carolina flare like that I would place money its a US boat, what is the LOA and Beam

boatboy72
15-02-2009, 07:17 PM
she is 21-22' loa not approx 8'-8'6" beam

Roughasguts
16-02-2009, 11:15 AM
I think anything over 8 foot wide you need a permit to tow the boat and trailer our roads.

With that width in mind she's definately from the states.

boatboy72
17-02-2009, 11:07 PM
no permit under 10' 9' just oversize sign front and rear and headlights on 10' the same plus revolving light