Navman 6600

[Pinguu]

Does anyone know how to use the fuel transducer with twin fuel tanks and engines. I have installed the fuel transducers and flow meters.

My problem is calibrating both motors, as it only recognises one fuel tank and not two. I have contacted navman and sent the unit back for a software upgrade and have it back , but cant seem to work it out , and my manual tells me nothing.

Please help.

[John Buoy]

My 6600 unit only recognises the one tank.
If you are running 2 seperate tanks which are not hooked up
together then you will need 2 seperate display units i believe.
If your tanks are hooked up together then make sure you have selected
2 engines in your fuel set up.

Maybe others might be more specific as i only have the single engine.

regards Frank

[sharkcat one]

Does anyone know how to use the fuel transducer with twin fuel tanks and engines. I have installed the fuel transducers and flow meters.

My problem is calibrating both motors, as it only recognises one fuel tank and not two. I have contacted navman and sent the unit back for a software upgrade and have it back , but cant seem to work it out , and my manual tells me nothing.

Please help.
hi guys
if you are using twin tanks you need to order a " T " connector for the cables.

if you already have one ring navman help line
no sure of the number , may have to ask salesmen

cheers