Transom Problem

[Joeykeevus]

Hi Everyone,
I have a 5m fibreglass boat (mid 80's model). I was wondering if anyone could tell me how to tell if there are problems with the transom, such as damage or rot etc. I undestand that repairs are $2k upwards.
Thank you

[Noelm]

a couple of very simple checks are, get the handle of a screw driver or a small hammer and tap on the outside, if it is solid, there is a distinct "tap" if soft there is a dull "thunck" also have the Motor tilted up and give the gearbox a bit of a push downwards, you will see it flex into the transom if it is rotten, these are not the only tests, or the be all to end all, but they can be done easy in a couple of minutes.

[Roughasguts]

You can also remove the bungs housing and check out the timber inside if it's wet and crumbly you got the rot.

[Joeykeevus]

Thanks guys for your help. It's not a thing to take lightly, so I appreicate your assistance.

[jimbo59]

If dirty water comes out of the bungs well after it should the transom is completly gone , give me a ring if you want a new transom or pod fitted.0414368508. Jims boat repairs.

[Roughasguts]

Is that a new franchise something like Jims mowing ?

[jimbo59]

No its my own business, not affiliated with the JIMS franchises.

[BaitThrower]

No its my own business, not affiliated with the JIMS franchises.

Crazy if you were! IMO