View Full Version : Johnson props
trymyluck
20-07-2008, 11:12 AM
Hi
Just wondering whether a 13 spline prop off a 1970's motor will fit a 1999 motor with the 13 splines?
Mark
tunaticer
20-07-2008, 07:09 PM
I do not think it would be a good idea as the older prop most likely will not have a rubber bushing to protect your gearbox from impacts or out of tune vibrations of the prop.
It may fit but it would not be worth the risk.
Jack.
trev1
20-07-2008, 07:17 PM
Just take off your prop and try it. If you're unsure, changing a prop is something you should be able to do , in case you ever need to.(I have needed to lots of times). As long as the major and minor diameter of the splines are the same and the props length and position on the spline are the same it'll go on.
We are talking about the same HP (and therefore gearcase size) motors aren't we??
FNQCairns
20-07-2008, 07:44 PM
Pretty sure it will, they have not changed much if any actually.
cheers fnq
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.